Konica Minolta 920 - Manual (Page 22)

4 User Authentication in Enhanced Security Mode
14 bizhub PRO 920
8
Specify the usable function.
To prohibit a specific function, touch the key on the New User Regis-
tration Screen to release the highlight.
9
Touch [OK].
When settings are completed, touch [OK] on the New User Registration
Screen.
The User Authentication Setting Screen will be restored.
4.3 To change a user data
Follow the procedure below to change a user data (user name and password)
once registered.
!
Detail
Passwords are case sensitive.
If a wrong password or fewer than 8 alphanumerical characters are en-
tered and the [OK] is touched, the warning message “Password does not
match” will appear, and no key will work for five seconds. Enter the right
password after five seconds.
The current password cannot be used again.
If authentication fails, the information will be saved in the audit log.
Procedure
1
Press [Utility/Counter] on the
control panel.
The Utility Screen will be dis-
played.