Kathrein UFD 574/S - Manual (Page 47)

Installation
47
Please mind the suppor-
tive information you can
read in the individual
menu items by pressing

!
Installation
Network Configuration
Of course, new networks can also be added to the network configura-
tion.
Refer to menu item 'antenna alignment' in the installation menu for
support in aligning the antenna.
Get to 'network configuration' by pressing

to call up the main
menu, and by using the keys

and

(plus password – if acti-
vated), scroll to the submenu 'installation'. Select 'network configura-
tion' by pressing

. Now, you can add or select a new network.
Consider that your installation must be set accordingly!
In the next step, e. g. scroll with the keys

to a desired entry,
'area 2' or any other.
After pressing

or

the question whether you want to add the
network is displayed on the screen.
Confirm by pressing

.
The following is displayed:
You can now use the keys

,

and

or

to make the entries
in the respective positions according to your receiving installation.
Press

three times to exit the menu while the new station data are
being stored.
Under point 'operation', you have to enter whether your active antenna
is to be fed by the receiver.
Under point 'stand-by', you have to enter whether the supply voltage is
to be disengaged when the receiver is switched to stand-by.