Kenwood KDC-W241 EN - Manual (Page 4)

4 | KDC-W3041/KDC-W312/KDC-W241/KDC-241
General functions
Power/Source select button [SRC]
Turns on the power.
When the power is on, the source switches between
Tuner (“TUNER”) , CD (“CD”) , Auxiliary input (“AUX”),
and Standby (“STANDBY”) each time this button is
pressed.
Press at least 1 second to turn off the power.
Volume control [VOL]
Bass boost [B.BOOST]
Switches between Boost 1 (“BB-L L1”), Boost 2 (“BB-L
L2”), and Boost off (“BB-L OFF”) each time this button
is pressed.
Faceplate release Release
Releases the faceplate lock so that it can be removed.
Refer to the following diagram when reattaching the
faceplate.
¤
• The faceplate is a precision piece of equipment and can be
damaged by shocks or jolts.
• Keep the faceplate in its faceplate case while detached.
• Do not place the faceplate (and the faceplate case) in areas
exposed to direct sunlight, excessive heat or humidity. Also
avoid places with too much dust or the possibility of water
splashing.
• To prevent deterioration, do not touch the terminals of the
unit or faceplate with your fingers.
Auxiliary input Auxiliary input
Connect a portable audio device with mini-plug cable
(3.5 ø).
⁄
• Use the mini-plug cable which is stereo type and does not
have any resistance.
Muting volume upon reception of phone call
When there is a call, “CALL” is displayed and the audio
system is paused.
When the call ends, “CALL” disappears and the audio
system comes back on.
The audio system comes back on when [SRC] is
pressed during a call.
Subwoofer output (KDC-W3041/KDC-W312)
Control knob
Switches between ON (“SW ON”) and OFF (“SW OFF”)
each time the bottom side is pressed for at least 2
seconds.
Text/Title scroll (KDC-W3041/KDC-W312/
KDC-W241) Control knob
Scrolls the CD, audio fi le, and Radio text display when
pressing the top side for at least 2 seconds.
[VOL]
Release Display
[SRC] [1] [2] [3] [4] [5] [6] [TI]/[AUTO] [B.BOOST]
Disc slot Auxiliary input [
] Control
knob
Basic Operation