Kyocera QCP 2700 - Manual (Page 33)

[25]
Menu Length (Menu 66):
Selects long or short feature menu. The short menu includes only a
few often-used items while the long menu includes all of the many features of the phone.
See pages 20 and 21 for menu tree layouts.
Network (Menu 7)
This allows you to set some service provider network settings.
Roam Alert (Menu 71):
Sounds an audible alert when roaming conditions occur.
Drop Alert (Menu 72):
Displays text and sounds an audible alert when a call is dropped due to
a signal fade.
Privacy Alert (Menu 73): Sounds an audible alert whenever the enhanced voice privacy
availability changes after call setup.
Auto-N.A.M. (Menu 74):
Allows the phone to automatically switch on one of the programmed
NAMs (Number Assignment Module—which is basically another way to say “phone
number”), if necessary.
Set N.A.M. (Menu 75): Allows you to set two different NAMs (Number Assignment
Module—which is basically another way to say “phone number”).
Set System*/Set Service** (Menu 76):
This feature is set in accordance with the cellular or PCS
company system your phone uses. Leave this setting as “AUTOMATIC” unless you want to
alter the system selection as described in the Basic Functions section.
Force Call* (Menu 77
for the QCP-820 phone
):
forces the phone into analog mode for the
next call or the next ten minutes.
Data/Fax In (Menu 77 for the QCP-1920 and QCP-2700 phones; Menu 78 for the QCP-820 phone): Sets the
phone in a mode capable of receiving incoming data calls or fax calls. (It is not necessary
for outgoing data/fax calls.) Normal incoming voice calls cannot be received when this
feature is activated.