Karcher K 3.540 - Manual (Page 8)

8
English
This pressure washer has been tested
by Kärcher's quality assurance team. A
small amount of water may be present
in the water inlet or outlet. This is normal
and will not affect the performance of
the pressure washer.
 STEP 1:
Insert the spray wand of your choice
into the trigger gun. Press in against
the spring tension and twist into
locked position.
 STEP 2:
Insert the high pressure hose tightly
into the quick coupling on the appli-
ance, it will lock in audibly.
Note: Make sure the connection nip-
ple is aligned correctly.
Check the secure connection by
pulling on the high pressure hose.
Disconnect:
 Push the casing of the quick cou-
pling for the high pressure hose to-
ward the rear and disconnect the
high pressure hose from the appli-
ance.
 STEP 3:
Install the supplied connector to the
unit’s water inlet.
Note: Never attach the garden hose
connector to the unit’s water inlet!
 STEP 4:
Screw the supplied garden hose
connector on to the end of your gar-
den hose. Push the garden hose
connector on to the water inlet con-
nector and make sure you hear it
click into place before proceeding.
OPERATING INSTRUCTIONS