Karcher K 3.540 User Manual
Page 7
English
7
STEP 3:
Insert detergent suction tube onto
the hose fitting.
Install the dosage regulator and con-
nect using 2 screws.
Note: During installation you must
make sure that the tongues of the
dosage regulator match up with the
intended recesses in the casing.
STEP 4:
Push the high pressure hose into the
trigger gun until it locks audibly.
Note: Make sure the connection nip-
ple is aligned correctly.
Check the secure connection by
pulling on the high pressure hose.
Disconnect:
Press the disconnect key on the trig-
ger gun and remove the high pres-
sure hose from the trigger gun.
Install the dosage regulator for detergent Connect the high pressure hose to
the hand spray gun