Krown Manufacturing 200 - Manual (Page 16)

DIRECT CONNECT WITH THE KROWN 200 (CONT.)
AUTO (DIRECT) DIALING
Turn the Power Switch ON.
Indicates your TDD is ready
to operator.
If in acoustic mode, the Krown 200 will automatically change to and remain in Direct Connect when
you plug your TDD into the phone line.
TDD is now ready to dial.
If the TDD is not plugged into the phone line, the screen will display:
Check phone line and press
[SHIFT] + [DIAL] again.
TDD is now ready to dial.
Choose phone number location
M (for example) and dials.
REDIAL
If you want to use the Redial feature, do not turn the TDD off after you dial a number. Use [CTRL] +
[9] to disconnect the telephone line.
Automatically redial the
last number dialed
There is another unique feature that the Krown 200 provides. If you intend to use the Krown 200
behind a PBX or a telephone system that will send a second dial tone to your phone after you have
dialed the access code for outbound calling (usually an 8 or a 9), the TDD will detect this secondary
dial tone and dial the rest of the number automatically. This features is activated by using the + sign
between the digits.
This feature may be used in keyboard dialing or memory dialing.
5551234 will be dialed after a short waiting time for a second dial tone.
HANG-UP KEY
Note: When in Direct Connect it is possible to make several phone calls without turning the Krown 200 OFF between each call. To
hang-up (disconnect) between calls, press [CTRL] and ]9]. The TDD is then ready for you to make another call.
14
KROWN - KROWN 200
SHIFT + DIAL
TYPE NUMBER OR A-Z
LINE NOT CONNECTED
TYPE NUMBER OR A-Z
M
DIALING 5551234
CTRL + DIAL
CHECKING FOR DIAL TONE
9 + 5 5 5 1 2 3 4
9 + 5 5 5 1 2 3 4
CTRL + 9
DISCONNECT (Y/N)?
Y
DISCONNECTED