Kenwood TK-3302 - Manual (Page 13)

4
If you are not using a speaker/
microphone, install the cover over
the speaker/ microphone jacks using
the supplied 3 x 6 mm screw.
Note: To keep the transceiver water
resistant, you must cover the speaker/
microphone jacks with the supplied
cover.
i
nStAlling the
c
over over the
S
peAker
/ m
icrophone
J
AckS
i
nStAlling the
o
ptionAl
S
peAker
/ m
icrophone
(
or
h
eAdSet
)
1 Insert the speaker/ microphone
(or headset) plugs into the
speaker/ microphone jacks.
2 Attach the locking bracket using
the supplied 3 x 6 mm screw.
Note: The transceiver is not fully
water resistant while using the
speaker/ microphone.
Speaker/ microphone
locking bracket
Speaker/ microphone
jack cover