Kenwood TK-380 - Manual (Page 29)

24
To View the Caller IDs in the Stack Memory:
The mail icon ( ) will flash when a Selcall call is
received and stacked.
1 Press and hold the A key for more than 1 second
to enter Stack Mode.
• The last received Caller ID is displayed with the Caller
ID number. “I” (ID) appears with the number.
2 Press the tB or Cs key to select the ID you
want to view (if more than one ID is stored in the
stack memory).
3 To erase the ID, press and hold the S key for
more than 1 second.
Identification Codes:
An ID code is a combination of a 3-digit Fleet
number and a 4-digit ID number. Each transceiver
must have its own Fleet and ID number.
• Enter a Fleet number (100 ~ 349) to make a group call.
• Enter an ID number (1000 ~ 4999) to make an individual
call in your fleet.
• Enter a Fleet number followed by an ID number to make
an individual call in your desired fleet (Inter-fleet call).
• Select “ALL” Fleet and “ALL” ID to make a call to all units
(Broadcast call).
• Select “ALL” Fleet and enter an ID number to make a call
to the selected ID in all fleets (Supervisor call).
Note:
◆ Broadcast and Supervisor calls are programmed functions
that cannot be made with a keypad.
◆ The ID range may be limited by programming.