Kyocera SL300R - Manual (Page 111)

6-3
6
G
Using the SET U
P
Mode Functions
You can adjust the LCD monitor brightness through 5 levels. Set the brightness to your
preferred level.
2
Press
U
or
D
on the 4-way button to select
[AF METHOD] and then press
R
.
3
Press
U
or
D
on the 4-way button to select
the desired setting and then press the OK
button
E
.
4
The selected AF method is set and the screen in step 2
reappears.
[BRIGHT CNTRL]
Adjusting the LCD Monitor Brightness
1
Switch the camera on and press
O
or
Q
on the mode
button until the “
G
” icon lights on the mode select LED.
2
Press
U
or
D
on the 4-way button to select
[BRIGHT CNTRL] and then press R .
3
Press
U
or
D
on the 4-way button to select
the desired setting and then press the OK
button
E
.
+2: Sets the maximum brightness.
+1: Sets the brightness slightly higher than normal.
STANDARD: Normal level of brightness. (default)
–1: Sets the brightness slightly lower than normal.
–2: Sets the minimum brightness.
4
The selected brightness is set and the screen in step 2
reappears.
AF MODE
AF METHOD
BRIGHT CNTRL
BACKLIGHT
DATE
SAF
SPEED
STANDARD
BRIGHT
2003.01.01
INSERT DATE NO DATE
SET UP(1/3)
AF MODE
AF METHOD
BRIGHT CNTRL
BACKLIGHT
DATE
SAF
SPEED
FRAMES
BRIGHT
2003.01.01
INSERT DATE NO DATE
SET UP(1/3)
AF MODE
AF METHOD
BRIGHT CNTRL
BACKLIGHT
DATE
SAF
SPEED
STANDARD
BRIGHT
2003.01.01
INSERT DATE NO DATE
SET UP(1/3)
AF MODE
AF METHOD
BRIGHT CNTRL
BACKLIGHT
DATE
+2
+1
–1
–2
STANDARD
INSERT DATE NO DATE
SET UP(1/3)
Finecam_E.book Page 3 Thursday, August 28, 2003 6:21 PM