Kohler K582 - Manual (Page 13)

13
Parts Ordering
The engine Specification, Model, and Serial Numbers
are required when ordering replacement parts from
your Kohler Engine Service Dealer. These numbers
are found on the identification plate which is affixed to
the engine shrouding. Include letter suffixes if there
are any. See “Engine Identification Numbers” on
page 5.
Always insist on genuine Kohler parts. All genuine
Kohler parts meet strict standards for fit, reliability,
and performance.
Major Repair
Major repair information is available in Kohler Engine
Service Manuals. However, major repair generally
requires the attention of a trained mechanic and the
use of special tools and equipment. Your Kohler
Engine Service Dealer has the facilities, training, and
genuine Kohler replacement parts necessary to
perform this service. For Sales & Service assistance
call 1-800-544-2444 (U.S. & Canada) or contact your
Kohler Engine Dealer or Service Distributor, he’s in
the Yellow Pages under Engines-Gasoline.
Model Designation
Model K582S for example: K indicates K-Series,
58 indicates the approximate cubic inch displacement,
2 indicates the number of cylinders. Letter suffixes
following the model numbers designates a specific
version, as follows:
Suffix Designates
EP Generator Set
Q Quiet Model
S Electric Start
Specifications
Model: ................................................................................................................................... K582
Bore: ................................................. inches (millimeters) ................................................... 3.50 (88.9)
Stroke: ............................................... inches (millimeters) ................................................... 3.00 (76.2)
Displacement: .............. cubic inches (cubic centimeters) ................................................... 57.7 (946)
Power (@3600 RPM): ................. horsepower (kilowatts) ................................................... 23 (17.1)
Weight: .................................................... lbs. (kilograms) ................................................... 187 (85.0)
Oil Capacity: ......................................... U.S. pints (liters) ................................................... 8 (3.8) 1
Spark Plug Gap: ............................... inches (millimeters) ................................................... 0.025 (0.65) 2
Spark Plug Size: ............................................. millimeters ................................................... 14
Spark Plug Type: .................................................................................................................. Champion RH10 or equivalent
Breaker Point Gap (Nominal) ........... inches (millimeters) ................................................... 0.020 (0.508) 3
1 An additional pint (0.5 L) required when oil filter is changed. For best results, fill to "F" mark on dipstick as opposed to
adding a given quantity of oil.
2 Gaseous fueled engines – gap .018 in. (0.45 mm).
3 After setting point gap, start engine and check timing using a timing light – adjust governor accordingly.