Konica Minolta 130C - Manual (Page 46)

46
FOR OWNERS OF THE QUARTZ-DATE MODEL
3. Point the remote control toward the
front of the camera and press either
the release button (•) or the delay
button (2s) to take the picture.
• If the release button (•) is pressed, the self-
timer lamp on the front of the camera will
blink once before the picture is taken. If the
delay button (2s) is pressed, the lamp will
blink for two seconds before the picture is
taken.
• To save power, the camera automatically shuts down if the shutter is not released in
approximately 8 minutes.
• Under fluorescent or extremely bright lighting, or with backlit subjects, the remote control
may not operate or the effective distance may be reduced.
• The remote control mode will remain in effect after the picture has been taken. Press the
drive-mode button to reset the drive mode, or turn the camera off.