Display(s), Number codes, Start, easy minute – KITCHENAID KEHV309 User Manual
Page 8: Upper oven cancel and cancel off, Clock
8
Display(s)
When power is first supplied to the appliance, everything on the
display(s) will light up for 5 seconds. Then, “PF id = 27” or
“PF id = 30” will appear. Touch LOWER OVEN CANCEL, UPPER
OVEN CANCEL or CANCEL OFF (on some models) to clear
display(s).
Any other time “PF id = 27” or “PF id = 30” appears, a power
failure occurred. Touch LOWER OVEN CANCEL, UPPER OVEN
CANCEL or CANCEL OFF (on some models) and reset the clock
if needed.
Lower Oven Display (combination oven models)
When the lower oven is in use, this display shows the lower oven
temperature, heat source(s) and start time.
During lower oven Timed Cooking, this display also shows a
vertical bar and minute time countdown and the stop time (if
entered).
If “Err” appears on the display, an invalid pad was touched.
Touch LOWER OVEN CANCEL, UPPER OVEN CANCEL or
CANCEL OFF (on some models) and retry the entry.
When the lower oven is not in use, this display is blank.
Upper Oven Display (combination oven models),
Display (single oven models)
When the upper oven or single oven is in use, this display shows
the upper oven or single oven heat source(s), cooking power,
quantities, weights and/or help prompts.
If “RETRY” flashes on the display for 1 second, an invalid pad
was touched. Retry the entry.
When the upper oven or single oven is not in use, this display
shows the time of day or Timer countdown.
Number Codes
The oven is preset with shortcut number codes for High Speed
and Microwave Cooking. A number code includes one or more of
the following; cooking power, cook time and food quantity or
weight. See the code charts in the “High Speed Cooking,”
“Custom Reheat,” “Custom Defrost” and “Popcorn” sections for
additional information.
Start, Easy Minute
The START pad controls 2 separate functions: Start and Easy
Minute.
Starting
The START pad begins any upper or single oven function except
the Timer. If not touched within 5 seconds after pressing a pad,
“START?” will appear on the display as a reminder. If not touched
within 5 minutes after pressing a pad, the display will return to the
time of day mode and the programmed function will be canceled.
If cooking is interrupted, touching START will resume the preset
cycle.
Adding Minutes
During High Speed Cooking, Crisping and Broiling, touching
EASY MINUTE (START) while the oven is operating will add cook
time in 1-minute increments.
During Microwave Cooking, touching EASY MINUTE while the
oven is operating, or at the end of a cycle, will add cook time in
1-minute increments.
During Convection Cooking, touching EASY MINUTE will not add
minutes.
Upper Oven Cancel and Cancel Off
The UPPER OVEN CANCEL or CANCEL OFF pad stops any
upper or single oven function except for the Clock, Timer and
Control Lock.
The oven will also turn off when the door is opened. When the
door is opened, the element(s) and fan will turn off, but the oven
light will remain on. Close the door and touch START to resume
the cycle.
Clock
This is a 12-hour clock and does not show a.m. or p.m.
To Set:
Before setting, make sure the ovens, Timer and Timed Cooking
are off.
1. Touch CLOCK SET • START.
2. Touch the number pads to set the time of day.
3. Touch CLOCK SET • START or START.
To remove the time of day from the display: Touch and hold
CLOCK SET • START for 5 seconds.
To return the time of day to the display: Touch CLOCK
SET • START. The time should not have to be reset.