Direct printing (pictbridge) problems – Kodak EasyShare C330 User Manual
Page 52
46
www.kodak.com/go/support
Troubleshooting
Direct printing (PictBridge) problems
Ready light glows
steady green
■
Shutter button is pressed halfway down. Focus and exposure are set.
Camera is operating normally.
Ready light glows
steady orange
■
The Mode dial is set to Favorites. Camera is operating normally.
Ready light blinks
orange
■
Flash is not charged. Wait. Resume picture-taking when the light stops
blinking and turns off.
■
Auto exposure or auto-focus are not set. Release the Shutter button
and recompose the picture.
Ready light glows
steady red
■
Camera’s internal memory or card is full. Transfer pictures to the
computer (
), delete pictures from camera (
), switch
image storage locations (
), or insert card with available
memory (
■
Camera processing memory is full. Wait. Resume picture-taking when
the light turns off.
■
Card is read-only. Change image storage location to internal memory
(
), or use a different card.
Status
Solution
Cannot locate desired picture.
■
Turn the Mode dial to Auto. Make sure the camera is
not in Favorites mode.
■
Use the Direct print menu to change the image storage
location.
The Direct print menu interface
turns off.
■
Press any button to redisplay the menu.
Cannot print pictures.
■
Ensure that there is a connection between camera and
printer (
).
■
Ensure the printer and camera have power (
Camera or printer display an
error message.
■
Follow the prompts to resolve the issue.