Kenwood DDX8029 User Manual
Page 67
English 67
Crossover Network Setup
You can set a crossover frequency of speakers.
1
Select the speaker to set the crossover
4
1
3
1
2
2
5
1 Sets the High Pass Filter of the front speaker.
2 Sets the High Pass Filter of the rear speaker.
3 Sets the Low Pass Filter of the sub woofer.
4 Switches to the crossover setup screen.
5 Returns to the original screen.
2
Display the Crossover setup screen
3
Set the crossover
6
7
8
6 Sets the cross over frequency.
7 Sets the sub woofer phase. (Only when
"Subwoofer" is set to "On" in Audio setup
and "LPF SUB FREQ" is set to other than
"Through")
8 Returns to the original screen.
DVD Setup
You can set up the DVD play.
1
Display the DVD SETUP screen
Touch [DVD SETUP] in the SETUP Menu
(page 66).
2
Setup each item
1
2
3
4
5
1 Selects a disc menu language.
*1
(See
2 Selects a subtitle language.
*1
(See
3 Selects an audio language.
*1
(See
4 Sets the dynamic range. (
Wide)*
1
The dynamic range is reduced by changing
from "Wide" to "Normal" and from "Normal"
to "Dialog". "Dialog" makes the total sound
volume becomes larger as compared with
"Wide" and "Normal", allowing you to listen
to the movie's dialog more clearly.
This is effective only when you are using a
Dolby Digital software.
5 Returns to the original screen.
⁄
• *1 Disabled when a DVD is being played.
Next page
3