Kodak 4620 - Manual (Page 59)

60
SPECIFICATIONS*
General specifications
Playable disc types: DVD, DVD+R, DVD-R, DVD+RW, DVD-RW, DVD+R DL, Audio CD, CD-R,
CD-RW, VCD, SVCD, MP3 CD, MP3 DVD, Kodak Picture CD
Playable disc formats: MPEG-1/2, MPEG-4, VCD, SVCD, JPEG, MP3, WMA, DivX ® , XviD,
DivX ® VOD
TV systems supported: NTSC, PAL, Multi
Video out formats: CVBS, RGB over SCART, S-Video, Component-Video**,
Progressive-Scan**
Power supply: AC 100~230V, 50/60Hz
Power consumption DVD 4010: 6.4W
Power consumption DVD 4620: 8.5W
Power consumption DVD 4010 (standby): 1.9W
Power consumption DVD 4620 (standby): 3.3W
Standby LED indicator:
Red
Dimensions DVD 4010 (W x H x D): 226mm × 50mm × 236mm
Dimensions DVD 4620 (W x H x D): 350mm × 47mm × 250mm
Weight DVD 4010: 1.425 kg
Weight DVD 4620: 2.075 kg
Operation status: Horizontal
Operation conditions: 5°C to 35°C (41°F to 95°F)
Laser: Semiconductor Laser, wavelength 650nm and 790nm
Audio/Video connections
AV connector SCART: (R) 0.7V (75 ohm), (G) 0.7V (75 ohm), (B) 0.7V (75 ohm),
(H/V sync.) 1.0Vpp (75 ohm)
S-Video out: Mini DIN 4-pin, (Y) 1.0Vpp (75 ohm), (C) 880mVpp (75 ohm)
Composite video out: One pin jack, 1Vpp (75 ohm)
Component video out**: (Y) 1.0Vpp (75 ohm), (Pb/Pr/Cb/Cr) 0.7Vpp (75 ohm)
Analogue audio out: Two pin jacks, 2.0Vrms
Coaxial digital audio out: (SPDIF) IEC 958 for CD-DA / LPCM, IEC 1937 for MPEG 1/2, Dolby Dig-
ital
Audio features
D/A converter: 96kHz / 24 bit
Frequency response: DVD (96kHz): 4Hz to 48kHz
CD/Video CD (44.1kHz): 4Hz to 22kHz
Signal-to-noise ratio DVD 4010: >88.3dB
Signal-to-noise ratio DVD 4620: >88.3dB
Harmonic distortion: <0.015%
*Designs and specifications are subject to change without notice. All of the company or product names mentioned in
this manual are the trademarks or registered trademarks of their respective holders.
**Only available on model DVD 4620