Kenwood KVT-920DVD - Manual (Page 53)

53
Quick Effect Function
Returning to the Source Control Screen
Touch [ RTN ] to return to the Source Control
Screen.
Adjusting the Balance Levels
• Each time you touch [ ], the sound in the left
channel is emphasised.
• Each time you touch [ ], the sound in the
right channel is emphasised.
Adjusting the Fader Levels
• Each time you touch [ ], the sound in the front
channel emphasised.
• Each time you touch [ ], the sound in the rear
channel emphasised.
Recalling Your Settings of the Crossover
Network/Delay time
Touch [ 1 ] -[ 6 ] for the desired Crossover network
and delay time setting.
Recalling Your Sound Settings
Touch [ 1 ] -[ 5 ] for the desired sound preset
setting.
Touch [ 1 ] -[ 3 ] for the desired parametric
equaliser setting.
External Amp Control
Adjust the bass boost level of the external
amplifier using the main unit.
Each time you touch [ Amp Ctrl ] to switch the
Bass boost level as follows
" OFF "
Bass boost level is flat.
" MODE1 "
Bass boost level is low (+6dB).
" MODE2 "
Bass boost level is high (+12dB).
As of December 2000, the power amplifiers
controllable by the main unit are as follows:
KAC-X501F/PS501F/X401M/PS401M/X301T
/PS301T/X201T/PS201T
NOTE
A F
D
E
B
C
A
D
C
F E
B
Quick Effect Screen