Kobe Range Hoods CH0136SQB - Manual (Page 17)

14
MAINTENANCE
SAFETY WARNING
NEVER PUT YOUR HAND INTO AREA HOUSING THE FAN WHILE THE FAN IS
OPERATING.
For optimal operation, clean range hood surface and stainless steel baffle filters regularly.
Cleaning Hood Surface
CAUTION : NEVER USE ABRASIVE CLEANERS, PADS, OR CLOTHS.
Regular care will help preserve the appearance of the hood.
1) Use only mild soap or detergent solutions. Dry surfaces using soft cloth.
2) If hood looks splotchy (stainless steel hood), use an orange base cleaner to clean the
surface of the hood. Avoid getting cleaner on the control switches. Spread a light
coating over the surface of the hood and leave on for a few minutes. CAUTION: Do
not leave on too long as this may cause damage to hood finish. Use soft towel to
wipe off the cleaning solution, gently rub away stubborn spots. Use a slightly damp
towel to get rid of any cleaning solution. Use dry soft towel to dry the hood.
3) To bring glow back into a stainless steel finish, use a stainless steel cleaner.
4) DO NOT allow deposits to remain for extended periods.
5) DO NOT use ordinary steel wool or steel brushes. Small bits of steel adhering to the
surface may cause rust.
6) DO NOT allow salt solutions, disinfectants, bleaches, or cleaning compounds to
remain in contact with stainless steel for extended periods. Many of these compounds
contain chemicals, which may be harmful. Rinse with water after exposure and wipe
dry with a clean cloth.