Kompernass KH 6516 User Manual
Page 18
- 18 -
Skip to start of chapter (SKIP)
Note:
This function may not be available on all DVDs! If you attempt to carry
out a function that is not available the symbol
will be displayed on
the television screen.
Within the film on the inserted DVD/VCD/S-VCD during playback the buttons
SKIP FORWARD
and
SKIP BACKWARD
on the remote control or on the front
panel of the appliance allows you to skip…
•
forward to the beginning of the next chapter or
•
backward to the preceeding chapter
The respectively selected chapter will playback immediately without the necessity
of pressing the button
PLAY
. The number of the respectively selected chapter will
be displayed on the front panel of the DVD player to the left of the played
back so far time.
Title number input via the number buttons
Note:
This function may not be available on all DVDs! If you attempt to carry
out a function that is not available the symbol
will be displayed on
the television screen.
Instead of using the Skip function you can also access a title from within the
film of an inserted DVD/VCD/S-VCD directly by entering the title number via
the number buttons
0
to
9
on the remote control.
To do this …
•
During playback or when playback is cancelled press the number buttons
on the remote control that correspond to the title number that you want
i.e. press the
3
button for the third title or the buttons
1
followed by
0
for
the tenth title. The entered numbers will be briefly superimposed on the
television screen.
•
Then press the
OK
button on the remote control. Playback of the entered
number title will now start automatically.
Search function (Search)
To select a title or chapter from the inserted DVD/VCD/S-VCD direct you can
also use the search function:
Direct chapter or time selection using the search function (Search)
Note:
This function may not be available on all DVDs! If you attempt to carry
out a function that is not available the symbol
will be displayed on
the television screen.
Entry of the time position via the search function
In order to select a chapter by entering its time position …
•
During playback press the button
SEARCH
on the remote control.
The "Search" Menu will be superimposed on the television screen.
•
The – – – marked entry field Title is automatically the first selection.
Enter the desired title with the number buttons
0
to
9
. The title 01 is with
most DVDs the main film.
•
Press the control button
to select the – – – marked input field Chapter.
Enter the desired chapter with the number buttons
0
to
9
.
•
Press the control button
to select the – – : – – : – – marked entry
field Time. With the number buttons
0
to
9
enter the time position in
hours, minutes and seconds.
Example:
To begin playback 1 hour, 5 minutes and 30 seconds from the start of
a film press successively the number buttons …
•
0
,
1
for 1 hour;
•
0
,
5
for 5 minutes;
•
3
,
0
for 30 seconds
Subsequently press the
OK
button to start playback at the selected position.
If you want to remove a position from the entry field select the position to be
removed with the control buttons
and press the
CLR
button on the remote
control.
The display now skips back to "– – –".
To fade out the "Search" menu press the button
SEARCH
again on the
remote control.
Fast scan forward/backward
In order to select specific passages in fast scan mode during playback of the
inserted DVD/VCD/S-VCD …
•
For fast scan forward press the button
F.FWD
...
•
once for doubled fast scan speed; x2 is displayed on the television
screen
•
Twice for four times fast scan speed; x4 is displayed on the television
screen
•
three times for eight times fast scan speed; x8 is displayed on the
television screen
•
four times for sixteen times fast scan speed; x16 is displayed on the
television screen
•
five times for thirty two times fast scan speed; x32 is displayed on the te-
levision screen
•
For fast scan backwards press the button "F.RWD"…
•
once for doubled fast scan speed; x2 is displayed on the television
screen
•
Twice for four times fast scan speed; x4 is displayed on the television
screen
•
three times for eight times fast scan speed; x8 is displayed on the
television screen
•
four times for sixteen times fast scan speed; x16 is displayed on the
television screen
•
five times for thirty two times fast scan speed; x16 is displayed on the
television screen
Note:
During fast scan no sound will be played back.
•
To resume playback of the film at the selected location in normal speed,
during scan press the button PLAY on the front panel of the DVD player
or on the remote control. Play will again be displayed on the television
screen.