Krups Automatic Rice Cooker 3.21 3.21 User Manual
Page 6
8
C
OOKING
(
CONTINUED
)
On completion of cooking
• Open the lid.
The escaping steam is very hot.
• Serve the food using the plastic spoon
supplied with the appliance and re-
close the lid.
• The food remaining in the container will
keep warm for any second servings.
You can also re-start the “Keep warm”
mode manually (see preceding para-
graph).
• Press cancel .
• Unplug the appliance.
Steam cooking:
• Select the steam mode. Briefly press
the mode key. The first red “Rice coo-
king” light blinks. Press again on the
mode key to sequence through the
lights corresponding to the different
cooking modes . Stop pressing as soon
as the “Steam cooking” lamp blinks.
- Fig. 10
• Select the cooking time. In order for
cooking to start, you have to select a
cooking time. The appliance allows you
to program from 1 minute minimum to
60 minutes maximum for this cooking
mode. You choose the time so as to
suit the chosen recipe. Press repeated-
ly on the time key to increase the coo-
king time. You can also press conti-
nuously in order to speed up the pro-
cess.
• Press once on start to begin cooking.
The appliance allows you to program
between 60 minutes minimum and 9
hours maximum for this cooking mode.
Choose the time so as to suit the cho-
sen recipe. Press repeatedly on the
time key to increase the cooking time.
You can also press continuously in
order to speed up the process. The time
increases in hourly increments from 60
minutes up to 9 hours maximum.
• Press once on start to begin the
cooking process.
The automatic “Keep Warm” function
• On completion of cooking, irrespective
of the cooking mode chosen, the rice-
cooker passes automatically to the
“Keep warm” function. The orange
“Keep warm” light comes on.
• The food is thus kept warm and ready
to serve. To switch off this function,
press cancel .
• You also have the option of manually
engaging the “Keep warm” mode. Just
press the mode key to sequence
through the lights until the orange lamp
is selected. Press directly on start to
begin the warming process. - Fig. 11
• You cannot program a time for
this function. To switch it off, press
cancel .
11
10
▲
▲