Konka Group Z1 - Manual (Page 50)

Drive mode
Image size
Key func.
Self-timer
Single
Progressive
Bracketing
Quality Continuous
50 A DVANCED RECORDING
USING THE PROGRESSIVE-CAPTURE MODES
The Progressive-Capture drive modes continuously
record images while holding down the shutter-release
button. When the shutter button is released, the
images stored in the camera’s buffer memory are
saved. These drive modes are set in section 1 of the
recording menus.
Immediately after selecting the progressive option on
the menu, a selection screen is displayed to select
between standard and UHS Progressive Capture.
Use the left/right keys of the controller to select the
progressive mode. Press the central button of the
controller to set the drive mode displayed in the
bottom right corner of the screen. Pressing the menu
button cancels the operation without changing the
drive mode.
Compose the picture as described in the basic
recording operation section (p. 22). Press the shutter-
release button partway down (1) to lock the focus
exposure for the series.
Press and hold the shutter-release button all the way
down (2) to begin taking pictures; focus is locked with
the first frame. When the shutter-release button is
pressed and held, the camera will begin recording.
Release the shutter (3) to save the images in the
camera memory. The maximum number of frames
and the rate of capture depends on the progressive
drive mode selected. See the notes section on the
following page.
:select :enter
2 1 3
White balance