Konka Group Z1 - Manual (Page 48)

48 A DVANCED RECORDING
USING THE CONTINUOUS-ADVANCE MODES
The continuous-advance drive modes allow a series
of images to be captured while holding down the
shutter-release button. These drive modes are set in
section 1 of the recording menus.
Immediately after selecting the continuous option on
the menu, a selection screen is displayed to select
between standard and UHS continuous advance. Use
the left/right keys of the controller to select the
continuos advance mode. Press the central button of
the controller to set the drive mode displayed in the
bottom right corner of the screen. Pressing the menu
button cancels the operation without changing the
drive mode.
Drive mode
Image size
Key func.
Self-timer
Single
Progressive
Bracketing
Quality Continuous
:select :enter
Compose the picture as described in the basic
recording operation section (p. 22).
Press the shutter-release button partway down (1) to
lock the focus exposure for the series.
Press and hold the shutter-release button all the way
down (2) to begin taking pictures; focus is locked with
the first frame. When the shutter-release button is
pressed and held, the camera will begin recording
images until the maximum number has been taken or
the shutter button is released.
The maximum number of frames and the rate of
capture depends on the continuous-advance drive
mode selected. See the notes section on the following
page.
2 1
White balance