Kenwood DVF-5500 - Manual (Page 16)

P
repar
a
tions
16
DVF-5500
When you turn on for the first
time
The menu for a language selection will appear when you turn
on the unit for the first time. You must select a language to use
the unit.
POWER
POWER
ENTER
1 Press the [POWER] key to power on.
2 Use [
5/∞/2/3] keys to select a language then
press [ENTER] key and the confirm menu will
appear.
3 Use [
2/3] keys to select [Enter] then press [ENTER]
key.
Note:
When the power cord is plugged, wait for several seconds, and
then switch the power on.
Set up menu
By using the Setup menu, you can make various adjustments to
items such as picture and sound.
You can also set a language for the subtitles and the Setup
menu, among other things. For details on each Setup menu
item, see pages 17 to 19.
SETUP
ENTER
Set Up functions
To display and exit the Menu To display and exit the Menu
1 Press the [SETUP] key to display the menu. A sec-
ond press of the [SETUP] key will take you back to
initial screen.
To go to the next level:
Press the Cursor right [
3 ] key.
To go back to the previous level:
Press the Cursor left [ 2 ] key.
General Operation General Operation
1 Press the [SETUP] key.
• The Setup menu appears.
2 Use the Cursor up/down [
5/∞] keys to select the
desired option, then press the Cursor right [
3]
key to move to the second level.
• The screen shows the current setting for the selected item, as
well as alternate setting(s).
3 Use the Cursor up/down [
5/∞] keys to select the
second desired option, then press the Cursor
right [
3] key to move to the third level.
4 Use the Cursor up/down [
5/∞] keys to select the
desired setting, then press the [ENTER] key to
confirm your selection. Some items require ad-
ditional steps.
5 Press the [SETUP] key or [
£] key to exit the Setup
menu.