Kenwood DDX6019 - Manual (Page 71)

English | 71
Before Use Setup Menu
If you have pressed the Reset button or if you have
disconnected the Receiver from battery...
1 Enter the correct security code
0 — 9
You must enter the same security code as that you
have entered in Step 3 above.
2 Enter the security code
E n t e r
Now, you can use your Receiver.
Deactivating Security Code
To deactivate the Security Code function.
1
Display the Security Code Setup screen
S e c u r i t y
If S e c u r i t y is not shown,
touch or to display it.
S e c u r i t y
O f f O n
C L R S e c u r i t y C o d e
S I
5 5
4
3
2
1
1 Returns to the Control screen of the previous
source.
2 Calls the Sound Effects Menu. (page 76)
3 Calls the Setup Menu. (page 56)
4 Allows you to cancel a registration of the
security code.
5 Turns the SI function On or Off.
If turned "On", the burglar alarm lamp flashes
when the vehicle ignition is off. (
On)
2
Start to cancel a registration of the security
code
C L R
P a s s W o r d
E n t e r C a n c e l C l e a r
1 2 3
4 5 6
7 8 9
0
2 3 4
1
1 Enters the numbers in your security code.
2 Clears your entry.
3 Cancels the clears function and returns to the
Security Code Setup screen.
4 Clears your security code.
3
Enter a security code
0 — 9
Input by four-digit number.
4
Register your security code
E n t e r
Now, your security code is cleared.