KITCHENAID KSB465 - Manual (Page 11)

8
ENGLISH
Using the Blender
PULSE MODE Feature
Your KitchenAid
® blender offers Pulse Mode,
which allows a “Pulse-at-any-Speed” feature.
NOTE:
PULSE MODE will not work with
the CHOP ICE feature.
1. Before operating the blender, make
sure the pitcher is properly in place on
the blender base.
2. Put ingredients into pitcher, and firmLy
attach lid.
3. Press PULSE MODE. The indicator
light above the button will blink to
indicate that all 4 speeds are in the
PULSE MODE.
4. Select a speed button. Press and hold
for the desired length of time. Both
the speed button and PULSE MODE
indicators will stay lit when pulsing
at the selected speed. When button
is released, the blending will stop,
but the blender will remain in PULSE
MODE and the PULSE MODE indicator
will return to blinking. To pulse again,
simply press and hold the button of the
desired speed.
5. To turn off the PULSE MODE feature,
press OFF. The blender is now ready for
normal operation.
6. Before removing the pitcher, press OFF
to deactivate the blender, and unplug
the power cord.
Ingredient Cup
The 2 oz (60 mL) ingredient cup can be
used to measure and add ingredients.
Remove cup and add ingredients at STIR
or MIX speeds. When
operating at higher speeds,
with a full pitcher or with
hot contents, stop the
blender and then
add ingredients.
Soft Start™ Blending Feature
The Soft Start™ blending feature
automatically starts the blender at a lower
speed to draw ingredients into the blades,
then quickly increases to the selected
speed for optimal performance.
NOTE:
The Soft Start™ blending feature
only works when a speed is selected from
the “Off” mode. The Soft Start™ feature
does not engage with PULSE MODE or
CHOP ICE.