Keys Fitness Power Tower ST-PT Series - Manual (Page 6)

1
2
8 9
Assembly of
Power Tower
REMOVE ALL SECURITY TAPE AND WRAPPING
BEFORE BEGINNING.
1. Hand tighten bolts. Do not use wrenches at this time.
• Slide rubber endcaps (11) onto each end of both
base legs (5).
• Slide foam padding onto each push-up bar.
• Connect low cross support (34) to each base leg
with two support plates (13).
2. Hand tighten bolts. Do not use wrenches at this time.
• Connect each upright support (3) to each base leg (5).