Karcher G 3000 BH - Manual (Page 7)

English
7
Assembling
Illustration Description Tools re-
quired
1. Position wheels onto each
axle followed by the washer
(C) and then the nut (A).
Hand tighten with 1/2” (or
13mm) socket wrench. 1/2” wrench or
use alternative
size 13mm.
2. Attach accessory plate to top
handle. Align the holes on the
plate to the holes on the plate
to the holes on the frame.
Hand tighten screws (J).
Attach hook (K). Phillips Srew-
Driver Size #2
3. Assemble joints (I) to base
portion of frame. Use one 1/4”
bolt (D) and tighten with one
1/4” nut (B) for each side.
Hand tighten. 7/16” wrench
or use alterna-
tive size
11mm.
4. Attach the handle to the frame
of the pressure washer.
Align holes, insert one 5/16”
bolt (E), and tighten the knob
(F) for each side. none