Kenwood KRC-177RA - Manual (Page 11)

— 11 —
Station Preset Memory
Store the frequency of the station currently being listened to.
You can then recall that station with a single touch of a button.
Select the band/ station that you want to have stored.
Hold down the button (#1-6) that you want to use for the station,
for two seconds or more.
The button number blinks once in the display to indicate that the
data has been stored.
Recalling a Preset Station:
Press the preset station button (#1-6) for the desired station. The
number of the recalled station is displayed.
You can store 6 stations in each of the FM1, FM2, FM3, and AM
(MW and LW) bands.
NOTE
2
1
Recalling a Preset Station:
Press the preset station button (#1-6) for the desired station. The
number of the recalled station is displayed.
• When the AF function is turned on whilst auto memory entry
takes place, only RDS stations (i.e., stations with RDS capability)
are stored. RDS stations that have been preset for FM1 cannot
also be preset in FM2 or FM3.
• When the local seek function is turned whilst auto memory entry
takes place, stations with poor reception are not stored.
• When the Traffic Information function is on , only the local traffic
information station frequency will be stored.
Cancelling Auto Memory Entry During Its Operation:
Press the MENU button whilst auto memory entry is taking place
to stop the process.
NOTE
Auto Memory Entry
You can automatically store all the receivable frequencies in the
band currently being listened to, and then recall them with the
touch of a button later. This function is especially useful when
you are travelling and do not know what stations are available.
Up to 6 frequencies can be stored this way.
Select the band for auto memory entry.
Hold down the MENU button for one second or more.
"MENU" is displayed and the menu mode is turned on.
Press the ¢ button repeatedly until "A-MEMORY" appears in
the display.
Press the
4 button to search in the other direction.
Hold down either the AM button or FM button for two seconds
or more to start auto memory function.
The numbers of the preset station buttons showed in order.
When all the stations in a certain band are stored in the preset
memory, the auto memory entry stops. The tuner then plays the
last station received. 4
3
2
1