Kenwood TK-2200L - Manual (Page 27)

9
BACKGROUND OPERATIONS
t
ime
-
out
t
imer
(tot)
The purpose of the Time-out Timer is to prevent you from using
a channel for an extended period of time. This function is
useful, for example, when you accidentally keep the PTT switch
pressed. Additionally, by limiting the amount of time you can
continuously transmit, this feature helps you save on battery
power consumption.
If you continuously transmit for 60 seconds (default), the
transceiver will stop transmitting and an alert tone will sound. To
stop the tone, release the PTT switch. You can press the PTT
switch again to resume transmitting.
l
ow
B
Attery
w
Arning
Low Battery Warning alerts you when the battery needs to be
recharged or replaced.
While operating the transceiver, if the battery power becomes
low, an alert tone will sound every 30 seconds and the LED
indicator will blink red. Replace or recharge the battery pack at
this time.