Kodak EasyShare P750 - Manual (Page 11)

Getting started
www.kodak.com/go/support 5
Setting the time, date, and on/off times
The first time you turn on your frame, the Time, Date, and On/Off screens appear
automatically after you select your language.
For details on setting the 12- or 24-hour clock, current time, date, on/off times, and
energy saving activity sensor, see
page 22 .
Activity sensors—energy saver
The activity sensors turn the frame off if no light or sound is detected in the room; the
sensors turn the frame back on when light or sound is detected (this is the default
setting).
NOTE: When you first plug in your frame, the activity sensors take about 24 hours to adjust to the typical
light and sound levels in your home environment. During the first 24 hours, your frame may turn on
and off at unexpected times.
If you prefer, you can turn off the sensors—then turn the frame on and off manually
or set daily automatic on/off times. For details, see
page 23 .
To set the current date and time:
Press to change values.
Press to move to the next entry.
When you’ve entered all the
settings, press OK.