K & M - Konig & Meyer CMP-VOIP60 - Manual (Page 2)

4 Phone Functions
4.1 Making Calls over the Internet
User can call another VoIP phone or any PSTN telephone through the Internet by simply dialling
the destination number as you would do with any other phone. Please note that there are dialling
patterns required and areas you are allowed to dial may vary. Please consult your service
provider.
4.2 Receiving Calls over the Internet
When there is a call, answer it as you would do on any regular phone.
4.3 Speaker
Press SPEAKER on the phone to have a hands free call, press SPEAKER again to hang up or
pick up the handset to make a normal call.
4.4 Date and Time display
After you set the SNTP (synchronized to the Internet) or phones date and time, date and time will
show on the screen.
4.5 Call Duration display
The numbers will show on the screen.
4.6 Work as router/bridge
This phone can work as a family router/bridge, you can set it on the web: Network->WAN
Settings. Please select the type of the network you want to use.
Note: It is recommended to use the phone as a secondary router.
4.7 Volume Adjust
In WEB page: Phone Setting-> Volume Settings.
You can also use the keypad to change volume of speaker or hand set by Up/Down keys.
4.8 Phone book
By WEB page: Phone Book->Phone Book, you can set the phone list.
Using the phone: press MENU then use up/down to select the ‘Phone Book’ , press ENTER and
use up/down to select the ‘Add entry’, then press ENTER to add a contact to the list.
After you set them, press CONTACTS on the phone, then you can check the list by name or
press ENTER again to check them one by one.
4.9 Call list
Press CALL LIST, then you can check the DIALED, MISSED and RECEIVED calls. Press
UP/DOWN to check the RECEIVED/DIALED calls when the phone is idle.
4.10 Speed dial
In WEB page: Phone Book->Speed Dial Settings, you can set the speed dial numbers.
You can press number+# to dial out the dial number, too.
4.11 Melody Selection
In WEB page, you can select the melody of ringtone or turn it on/off.
You can press MENU and then use up/down to select the ‘Phone Setting’, press ENTER and
use up/down to select the ‘Ringtone’, and press ENTER again. Then you can set the volume of
ringtone in ‘Ringer Volume’ and select the melody in ‘Ringer type’.
-3-
4.12 Dial Plan
Replace prefix code: Use Replace rule or not.
Replace rule: If the prefix of the number you dialled is the same as the number which is entered
in the left blank, it will be changed into the number which is entered in the right blank. You can
use ‘+’ in the left blank to describe more than 1 prefix rule.
E.g. Replace rule: 001-> 005
(Dial Number): 00123456789012345, the real number being sent: 00523456789012345.
Dial Plan: Automatically dial out if the prefix of the number you dialled is the same as the one in
the blank. You can use ‘+’ in the left blank to describe more than 1 prefix rule. X can be used to
act as a number from 0-9.
Note: 0 cannot be set as the first character.
E.g. *XX+711XX
If you dial *02 or 71189, the number will be sent out automatically.
Auto Prefix: All numbers you dial will get this prefix and then be sent out.
Prefix Unset Plan: If the number is the same as you set, it will not use all the settings except
‘Auto Dial Time’ setting. You can use ‘+’ in the left blank to describe more than 1 prefix rule. X
can be used to act as a number from 0~9.
Auto Dial Time: Dial out if there is no new number input within this time duration.
5 Service Features
Important Note: Your service provider may not support all service features to some or all callers.
5.1 Caller ID display
When there is an incoming call, the screen will show you the caller ID.
5.2 Call Forwarding
5.2.1 Unconditional Call Forward
The incoming call will always forward to the destination number. Please set this function in web
page: Phone Setting->Call Forward.
5.2.2 No Answer Call Forward
The incoming call will forward to the destination number if there is no answer within the time you
have set. Please set this function in web page: Phone Setting->Call Forward.
5.2.3 Busy Call Forwarding
Another incoming call will be forwarded to the destination number set during a phone call. Please
set this function in the web page: Phone Setting->Call Forward.
-4-
EN EN