Kenwood VIDEO CD AUTO CHANGER KDC-C20V - Manual (Page 7)

Loading compact discs
7
'
'
O - N
O - N
'
'
'
Make sure the disc magazine is the right
way up with the "disc" logo on the top.Pull
the tray out by the projection.
Projection
"
0" (EJECT)
1
2
3
4
5
6
Tray
Place the disc on the tray with the label
facing upwards. Insert the tray into the disc
magazine until it locks. Check that the discs
and trays are inserted properly. The discs
are numbered from the bottom from 1 to
10.
• Take care to insert trays into the correct
grooves in the disc magazine and to insert
discs properly into the tray grooves.
Otherwise malfunction may occur or the
disc may be damaged.
• Insert all trays even when some of them
do not carry discs. Otherwire malfunction
or operation failure may occur.
• 8-cm discs cannot be used. If an 8-cm
disc adapter is used, the disc cannot be
ejected.
2 CAUTION
Open the CD changer door.
Insert the magazine into the CD changer
until it clicks.
Close the CD changer door.
Use the CD changer with its door closed to
prevent the entry of dust into the changer.
NOTE
Open the CD changer door, and press the
"
0"(EJECT) button.
Be sure to open the door completely before
pressing the "
0"(EJECT) button. If the door
is not completely open, the magazine may
hit the door and cause damage of
malfunction.
NOTE
Magazine ejection