Kenwood DVF-3300 - Manual (Page 26)

Operations
26 EN
Basic playback of disc
Program play
You can listen to the desired tracks of the current CD, MP3 or WMA in any desired order.
Program Edit
1
Insert a disc and close the tray. ( £)
4
You can select maximum 30 values by repeating
step
3.
5
Select the track you want to start playing on
the Program list.
Audio CD or MUSIC menu appears.
2
Press P.MODE key
The mark will appear to the right of the word "Pro-
gram" on the right side of the menu screen.
÷ The unit stops when the STOP (7) key is pressed. To
restart program play, press the PLAY key.
"Program" "List"
Example of audio CD menu
6
Press PLAY key to start.
Playback begins in the order in which you programmed
tracks. Playback stops after all of the tracks on the
Program list have played once.
mark
To exit the Program Edit mode, Press P.MODE key again.
3
Select a specific track on the "List" by Press Cur-
sor up/down (
5/∞) keys, then press ENTER key
to place the selected track on the "Program" list.
To repeat program play
During program playback, press the REPEAT
key on the remote.
Each press the key switches the mode.
1 "TRACK" : repeats the current track or file.
2 "ALL" : repeats all the tracks (files) on programmed list.
3 Goes off (repeat off)
If you press SKIP ( ¢) once during Repeat Track
playback, the repeat playback cancels.
Note Note
1
During STOP mode, press P.MODE and the
mark will appear.
2
Press the Cursor ( 2/3/5/∞) keys to select the
track that you wish to delete from the Program
list.
3
Press CLEAR key.
Delete the complete Program list
1
During STOP mode, press P.MODE and the
mark will appear.
2
Select "Clear All", then press ENTER key.
The complete program for the disc is deleted.
÷ The programs are also cleared when the disc is re-
moved.
Delete a track from Program list
*5634/22-32/EN 06.3.24, 3:28 PM 26