Keys Fitness HT65T.1-CE - Manual (Page 7)

Assembly
7
Figure 3
Figure 4
Step 3:
Connect the console harness from inside the left
upright to the console harness from the base
assembly as shown in Figure 3.
Next, attach left upright and right upright to base
using allen bolts M8x15 (Qty. 8) and washer
9x22x2 mm (Qty. 8). Do not tighten bolts all the
way at this time.
Step 4:
Attach the console assembly by connecting the
console harness, incline harness, EKG harness, and
speed harness as shown in Figure 4.
Next, attach the console assembly to the left and
right uprights using phillip screw M6x12 (Qty. 4).
CONSOLE HARNESS
ALLEN BOLT
WASHER
PHILLIP SCREW
CONSOLE
WIRE HARNESS
UPRIGHTS