General operation – Kenwood DUAL DIN SIZED CD RECEIVER DPX-MP4110 User Manual
Page 7
![background image](/manuals/158638/7/background.png)
English
|
7
General Operation
Audio Control
You can adjust following Audio Control items ;
Adjustment Item
Display
Range
Rear volume
“R-VOL”
0 — 35
Subwoofer level
“SW L”
–15 — +15
System Q
“User”/“Rock”/
“Pops”/“Easy”/
“Top40”/“Jazz”/
“Natural”
User setting/Rock/Pops/Easy/
Top 40/Jazz/Natural
(The indicator turns on
according to the setting.)
Bass level*
“BasLV”
–8 — +8
Middle level*
“MidLV”
–8 — +8
Treble level*
“TreLV”
–8 — +8
Balance
“BAL”
Left 15 — Right 15
Fader
“FAD”
Rear 15 — Front 15
Exit Audio Control mode (Volume control mode)
⁄
• “USER”: The customized Bass, Middle, and Treble levels
are effective. This item can be selected at any time.
* You can adjust these items in detail. Refer to the detail of Audio Control> (Page 7). * Source tone memory: Puts the set up value in the memory per source. (Detail Audio item is included) 1 Select the source to adjust Press the [SRC] button. 2 Enter Audio Control mode Press the Control knob. 3 Select the Audio item to adjust Press the Control knob. 4 Adjust the Audio item Turn the Control knob. 5 Exit Audio Control mode Press any button. Adjusting the detail of Audio Control Among the Basic Audio items, you can adjust the Bass level Adjustment Item Display Range Bass Center Frequency ”BasF” 40/50/60/70/80/100/ Bass Q Factor ”BasQ” 1.00/1.25/1.50/2.00 Bass Extend ”B EX” Off/On Middle level Adjustment Item Display Range Middle Center Frequency ”MidF” 0.5/1.0/1.5/2.0 kHz Middle Q Factor ”MidQ” 1.0/2.0 Treble level Adjustment Item Display Range Treble Center Frequency "TreF" 10.0/12.5/15.0/17.5 kHz ⁄ • When you set the Bass Extend to ON, low frequency response is extended by 20%. • You can exit the Audio Control mode at anytime by pressing any button except for Control knob and [ATT] 1 Select the Basic Audio item Select the desired item to be set in detail from 2 Enter Detail adjustment mode of Audio Control 3 Select the Detail Audio item to adjust Press the Control knob. 4 Adjust the Detail Audio item Turn the Control knob. 5 Exit the Detail Audio Control mode Press the Control knob for at least 1 second.
Press a button other than the Control knob.
Bass level, Middle level, and Treble level in detail.
120/150 Hz
button.
followings;
• Bass level
• Middle level
• Treble level
For how to select Basic Audio items, see
Press the Control knob for at least 1 second.