Keyspan Laptop Docking Station - Manual (Page 14)

Properties Tab
the Properties tab
The Properties tab in the Keyspan Serial Assistant allows you test your Keyspan adapter and
make changes to the behavior of the Keyspan adapter. The following is an explanation of the
items in this tab.
the Adapter pull down menu
The Adapter pull down menu is used to select which Mini Port Replicator you would like to
configure. If you only have one Keyspan Mini Port Replicator, you will not need to change the
selection.
the Endpoints radio buttons
The Endpoints radio buttons are used to configure how the Keyspan adapter will communicate
with the USB subsystem (software)on your computer. Most users will not need to modify the
default setting (High Performance (BULK)). You should only change this setting if you are sure
that your serial device needs a specific setting. The default setting is High Performance (BULK).
(continued on next page...)
Keyspan:Mini Port Replicator for Windows-v3.2 User Manual
This User Manual applies to the Keyspan Mini Port Replicator Software for Windows.
(rev 02jun19JA)
Page 14