Kenwood KDC-416S - Manual (Page 21)

Adjust the time manually.
Display and setting:
Select the display "CLK ADJ" during the selecting function in
the menu system.
Press either the 4 or ¢ button for at least two seconds to
enter the Manual time adjustment mode.
The time display will blink.
• Adjusting the hours
Press the FM button to advance the hours, or press the AM
button to make the hours go back.
• Adjusting the minutes
Press the ¢ button to advance the minutes, or press the
4 button to make the minutes go back.
Press the MENU button to end the Manual Time Adjustment
mode.
Exiting the Manual Time Adjustment mode would start the
clock counting. 4
3
2
1
Manual Time Adjustment
Display and setting:
"BEEP ON" : Beep setting is on. (Default setting)
"BEEP OFF" : Beep setting is off.
The beep sound is not output from the preout jacks.
NOTE
This function produces a beep sound that accompanies button
operation. It can be switched on or off.
Touch Sensor Tone
You can set the defaults for additional functions in the menu
mode. Make a setting for each function, referring to the
following operations.
Enter the menu mode
Press the MENU button for at least one second.
"MENU" is displayed when the menu mode is entered.
The function that you can adjust is indicated with the current
settings displayed.
Selecting function to set
Press the FM button to search through the functions until you
see the one you want to adjust in the display.
Press the AM button to search through the functions
backward.
Function items change in the order of features that follow in
the menu system.
Example: If you want to switch the setting of the touch sensor
tone function from on to off, first search through the
functions until you see "BEEP ON" in the display.
Changing setting for currently displayed function
Press either the
4 or ¢ button.
The setting will change for each function.
Example: The setting of the touch sensor tone will switch from
on to off, and "BEEP OFF" is displayed.
Ending the menu mode
Press the MENU button.
Make sure to end the menu mode when finished.
NOTE
4
3
2
1
Menu System
— 21 —
KDC-416S(K)_U.S_ver2.0 00.12.26 0:58 PM Page 21