KVH Industries TracPhone F55 - Manual (Page 95)

PC Programs Set-up using Ethernet/PPPoE
After this the connection can be made as described in
section 3.4.1 MPDS Connection.
Please note: The data connection services are only
available when the vessel is positioned inside an area
with Spot Beam coverage.
5.3 Set-up using Ethernet/PPPoE
This chapter describes the set-up and operation of data
connections via Ethernet and PPPoE using various PPPoE
clients.
5.3.1 Windows XP with Built-in PPPoE Client
Prerequisites
The PC must have an Ethernet adapter and Windows XP
installed and both must be operational. There must be a
network connection between the PC and the Fleet system.
As an example the the transceiver can be connected to the
computer through a switch or hub or directly using a
crossover cable.
Setting up the Connection
5
1. From the “Start” menu select “Settings” then “Network
Connections” and then “Create New Connection”.
This brings up the “New Connection Wizard”.
2. Click “Next”.
3. Select “Connect to the Internet” and click “Next”.
4. Select “Setup my connection manually” and click
“Next”.
84 May 2005