KVH Industries TracPhone F55 - Manual (Page 100)

List of Error messages Troubleshooting
6 Troubleshooting
6.1 List of Error messages
6.1.1 Satellite Network Messages
Within the satellite network a number of messages are
defined to indicate the network status. This section
describes the possible messages (Cause Codes) that might
be displayed in the TT-3620G Handset.
Cause Code Description Event
1001 Normal
(not shown in
the handset)
MES is clearing the call as instructed by
the relevant MES terminal equipment.
1011 Called party is
busy. MES is rejecting the call because the
specified MES terminal number is
currently busy, and MES has not been
authorized to divert calls which are
addressed to that number
1012 Called party is
busy MES is clearing the fixed-originated call
because subsequent to the acceptance of
the call and the signaling of the identity of
the mobile terminal to which the call will
actually be routed, that terminal has
become busy and hence cannot be rung
1021 No User MES is clearing the call because
6
May 2005 89