4 setting up the network connections, 1 peer-to-peer printing, Windows 98/ windows me – Konica Minolta FAX2900/FAX3900 User Manual
Page 47: Setting up the network connections -12, 1 peer-to-peer printing -12, Windows 98/ windows me -12
6
Network Printing in a Windows Environment (Available only with FAX3900)
6-12
6.4
Setting Up the Network Connections
6.4.1
Peer-to-Peer Printing
Windows 98/ Windows Me
✎
Important
Before continuing to set up the network settings, check the following:
Check that the computer is set up to use the TCP/IP protocol.
Check that the copier is also set up to use the TCP/IP protocol.
Check that the printer driver has been installed on the computer.
(For details on installing the printer driver, refer to “Installing the Printer
Driver” on page 3-1.)
1
Click [Start], point to [Settings], and then click [Printers] to open the
“Printers” folder.
2
Right-click the icon for the installed printer driver.
3
Click [Properties] to open the Properties dialog box.
4
Click the “Details” tab, and then click [Add Port].
5
Select
Other
.
6
Select
Peer2Peer
from the list of port types.
7
Click [OK].
8
Enter the copier IP address.
9
Click [OK].