Kobe Range Hoods CH2736SQB - Manual (Page 22)

20
Replacing Light Bulb
CAUTION: HALOGEN LIGHT UNIT MAY BE HOT! WAIT UNTIL UNIT IS COOL.
c c d e f
1. Make sure all controls are off, and range hood is unplugged.
2. Place the flat-headed screwdriver into the groove of the halogen light glass covering and the
housing.
c
3. Pop out the halogen light glass covering.
d
4. Gently pull out the defective light bulb and discard. Light bulbs should be 12V 20W maximum.
e
5. Using a cloth, hold the new light bulb and push securely into light socket.
6. Return halogen light glass cover to the housing.
f
7. Turn range hood ON to test for operation.