Basic operations – Kenwood KDC-MP345U User Manual
Page 4
4
|
KDC-MP345U/ KDC-MP245U
Basic Operations
Before Using
Exit of the Demonstration Mode
Turn off the demonstration mode when you use it
for the first time after installation.
1
Press the [VOL] knob to quit the demonstration
mode when the messages “CANCEL DEMO”,
“PRESS”, “VOLUME KNOB” are displayed (approx.
15 seconds).
2
Select “YES” and press the [VOL] knob.
When “NO” is selected, turn the [VOL] knob.
⁄
• Demonstration mode can also be cancelled in “DEMO
MODE” of
Adjusting the Clock
1
Press the [DISP] button several times until clock
display (“CLOCK”) appears.
2
Keep pressing the [DISP] button until the hour
display blinks.
3
Turn the [VOL] knob to adjust the hour.
4
Press the [VOL] knob to finish the hour adjusting.
The minute display blinks.
5
Turn the [VOL] knob to adjust the minute.
6
Press the [VOL] knob to finish the minute
adjusting.
Common Operation
Power and source select
Turns the power ON by pressing the [SRC]
button.
When power is ON, pressing the [SRC] button
switches among playable sources in the following
order:
Tuner (“TUNER”)
➜ USB (“USB”) or iPod (“iPod”)
➜ CD (“CD”) ➜ Auxiliary Input (“AUX”) ➜ Standby
(“STANDBY”)
➜ Tuner (“TUNER”)
Keeping pressing the [SRC] button for at least 1
second turns the power OFF.
⁄
• The source “iPod” and “CD” can be selected when each
source is ready to play.
Volume
Turning the [VOL] knob adjusts the sound
volume.
Clock display and Display scroll
Pressing the [DISP] button selects the display
mode.
Refer to
Keeping pressing the [DISP] button scrolls the
display.
Auxiliary input
Portable audio device can be connected with the
stereo mini-plug (3.5 mm ø).
[BAND]
[VOL]
[1][2] [3][4] [5][6]
[
] [D]
[
]
[DISP]
[SRC]
[ ]
[ ]
Release
Auxiliary input
USB Terminal
Disc slot
B64-4529-00_00_en.indd 4
09.10.1 8:23:52 PM