Kenwood FM MODULATOR SYSTEM KCA-R70FM - Manual (Page 18)

English
— 18 —
Connecting Wires to Terminals
To prevent fire when the ignition wire (Red) or battery wire
(Yellow) is short-circuited by coming into contact with the
vehicle chassis (ground), only connect the power supply after
making the fuse box connections.
Be sure to press the reset button after installation.
2CAUTION
2WARNING
Control output
Control input
Changer connection wire
FM modulator unit
FM/AM antenna input
FM/AM antenna output
Ground wire (Black) - (To car chassis)
Car fuse box
ACC
Ignition key
switch
Antenna plug
for automobile
Output
Car stereo
with FM tuner
Battery
Display unit
Battery wire + (Yellow)
Ignition wire + (Red)
CD/MD auto - changer input
Do not install an antenna of radio equipment or
distribute the antenna wire near the changer output
wire, for this could cause malfunction with this unit.
CD/MD auto-changer /
Sirius satellite radio tuner
O-N selection switch
"N"
KCA-R70FM_U.S 02.7.2 11:20 AM Page 18