Repeated playback (repeat mode), Repeated playback, Repeat mode) – Kenwood DPF-J5020 User Manual
Page 18
18
DPF-J5020 (En)
Programming tracks in desired order (PGM mode)
G
P
E
R
E
P
T
A
O
2
D
N
0
T
3
G
P
E
R
E
P
T
A
O
2
D
N
0
T
3
Preparation
÷ Load discs in the carousel.
0
Repeated playback
(REPEAT mode)
To repeat only the desired tracks
1Program the desired tracks by performing steps 1
to
3 of “Programming tracks in desired order”.
^
÷ Up to 32 tracks can be programmed by repeating steps 1.
2Switch REPEAT ON.
3Start playback.
÷ The current status is displayed when the key is pressed once. When it
is pressed while the status is displayed, the repeat ON status can be set
to OFF (or vice versa).
÷ All of the programmed tracks will be repeated.
÷ In case only one track is programmed, only that track will be repeated.
To cancel repeated playback
Press the REPEAT key twice. (REPEAT ON
→
OFF)
To repeat one selected disc
3Start playback.
Previous disc
Next disc
Within 8 seconds!
2Select the disc number.
4Switch REPEAT ON.
÷ The disc number can be selected directly by using the DISC SELECTOR
and numeric keys in place of the DISC SKIP keys.
For random repetition
(
For music type or user file repetition
∞
For best selection repetition
•
To cancel repeated playback
Press the REPEAT key twice. (REPEAT ON
→
OFF)
÷ The current status is displayed when the key is pressed once. When it
is pressed while the status is displayed, the repeat ON status can be set
to OFF (or vice versa).
1Check that the unit is in the normal play TRACK
mode.
#
E
REPEAT
ENTER
6
DOWN
UP
DISC SKIP
ENTER
6
E
REPEAT