Kyocera S2410 - Manual (Page 18)

10 Volume control
3 Call Features
This chapter describes call features such as
volume, holding calls, speed dialing and
other features.
Volume control
There are several ways to control the volume
of your phone.
Adjust volume during a call
To adjust the earpiece volume during a call,
press the
Volume Up or Volume Down key.
Use the speakerphone
Your phone has a built-in speakerphone. To turn
on the speakerphone, press the
Speakerphone
key. The speakerphone icon appears on the
home screen when the speakerphone is on. To
turn off the speakerphone, press the
Speakerphone key again.
Note: If you press the Speakerphone key during
an incoming call, you will answer the call.
Silence an incoming call
To silence the phone without answering the call
press a
Volume key or select Ignore .
To silence the phone and answer the call,
press a
Volume key or select Silence , then
press the Send key.
Hold call
The Hold Call feature allows you to place
incoming calls on hold until you are ready to
answer them. See “Hold calls” on page 44.
Speed dialing
The Speed Dial feature allows you to assign a one-
or two-digit shortcut to a contact. Before you can
use speed dialing you must save a phone number
as a contact and assign a speed dial location to it.
See “Customize a number” on page 25.
To call a contact that has a speed dial location.
1.
Enter the one- or two-digit speed
dial location.
2. Press the Send key.
1-Touch dialing
The 1-Touch Dialing feature is the fastest way to
speed dial a contact that has a speed dial location.
See “1-Touch dialing” on page 44.
82-K8216-1EN.book Page 10 Monday, September 22, 2008 2:27 PM