Install covers and restart water heater – Kenmore 300 Series User Manual

Page 17

Text mode
Original mode

Install Covers and Restart Water Heater

FIG. 23

INSTALL COVERS

After installing your water softener, replace the covers.
Angle the covers so the main cover clips onto the back
first, then bring down in front and clip on the two (2) tabs
inside the rim of the salt hole and lower the salt cover
closed. See Fig. 23.

RESTART THE WATER HEATER

Turn on the gas (or electric) supply to the water heater
and light the pilot.

YOUR PLUMBING INSTALLATION AND ELECTRICAL
WORK ARE NOW COMPLETE.

INSTALL COVERS

Salt Hole
Cover

Cover

(Main)

Questions? Call The Kenmore Water Line 1-800-426-9345