Kobe Range Hoods RA3830SQ - Manual (Page 15)

13
To Replace Light Bulb
CAUTION: HALOGEN LIGHT UNIT MAY BE HOT! WAIT UNTIL UNIT IS COOL.
1) Make sure all control switches are off, and range hood is unplugged.
2) Use a flat head screwdriver to pop out the protective covering as shown on Figure 18.
3) Gently pull out the defective light bulb and discard. Light bulbs should be 12V 20W
maximum. Refer to Figure 19. Push bulb securely into light socket.
4) Replace protective cover.
5) Plug in range hood.
Figure 18 Figure 19