Kenwood DPF-R 6030 - Manual (Page 15)

15
Press to clear tracks from the end.
To clear tracks from the program
To clear all tracks
÷ Each time the key is pressed, the last track in the program is cleared.
÷ The tracks which are programmed earlier than the track being played
cannot be cleared.
÷ Selected tracks can be also completely cleared just by operating the
OPEN/CLOSE ( 0) key.
÷ The entire program is cleared.
÷ Even when the performances of two tracks are continuous (which
occurs with classical or live recording music), the spaces will be
created if they have different track Nos.
Auto space function
During programming of tracks, a non-recorded space of a few
seconds will be automatically created between tracks. By record-
ing tracks with these spaces on tape, the search and repeat play
operations of tape using the DPSS function (which works by
searching the non-recorded spaces) can be performed reliably.
Programmed play (PGM mode)
CLEAR
P.MODE