KITCHENAID 5 Speed Professional Blender - Manual (Page 10)

8
6. Coil the power cord into the
storage area on the bottom of the
power base to shorten.
7. Place jar on power base.
8. Plug into a grounded 3-prong
outlet. Blender is now ready
to use.
9. Before removing the jar from the
base after use, always push the
OFF pad and make sure the
blinking red light is off, then
unplug. Lift the jar straight up,
with the collar attached, do not
twist. Do not unscrew the stainless
steel jar from the collar until you
are ready to remove the blade
assembly. Loosening the collar
with liquids inside the jar will
cause them to leak out.
Assembling Your Blender
Ultra
Po wer
Pro fessio
na l
Pro fessio
nal
Stir
Chop
Mix
Puree Liquefy
Off
On
Pulse
Ice Cru shing All Sp eeds
WARN ING: F LASH ING L IGHT INDIC ATES READ Y TO O PERA TE
DO NO T TOU CH BL ADES
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Failure to follow these
instructions can result in
death, fire or electrical shock.