Samsung SGH-N628 - Manual (Page 43)

85 84
T To on ne es s
Light only: only the backlight is switched on; the
phone neither rings nor vibrates.
Melody: the phone rings using the ringing tone
selected via menu option 4-1.
Vibration: the phone vibrates but does not ring.
Vibra+Melody: the phone both rings and vibrates.
Keypad Tone
Menu 4-5
This option allows you to select the tone that the
keypad generates when you press a key. The
following options are available.
OFF: the keys do not make any sound.
Tone: each key, when pressed, makes a different
sound.
Beep: each key, when pressed, makes the same
sound.
Message Tone
Menu 4-6
This option allows you to select how the phone
informs you that a new message has been received.
The following options are available.
SMS Tone1 ~ SMS Tone5: the phone uses an SMS
tone.
Single Beep: the phone beeps once.
Light Only: the service light on the top of the phone
flashes yellow.
Vibration: the phone vibrates but does not ring.
T To on ne es s
3. When you are satisfied with your melody, press
the Yes soft key.
4. Enter a title for the melody.
Note: For further details on how to enter
characters, refer to page 35.
You are asked if the melody is to become the
ringing tone.
5. To use the melody as the ringing tone, press the
Yes soft key.
The melody is saved and is played each time your
phone rings.
Deleting a Melody
1. Select the melody that you wish to delete.
2. Press and hold for a few seconds.
All notes are erased.
3. Press the Listen soft key. You are asked to
confirm that you wish to delete the melody by
pressing the Yes soft key.
Ring Volume
Menu 4-3
This option allows you to adjust the ringing volume
level.
Use the
or keys. The greater the number
of bars, the greater the volume level.
Alert Type
Menu 4-4
This option allows you to indicate how you are to be
informed of any incoming calls. The following options
are available.